How to fix a broken leg on a pool lounge chair?
Oct 02, 2025
Hey there! As a supplier of pool lounge chairs, I've seen my fair share of issues, and one of the most common problems is a broken leg on a pool lounge chair. It can be a real bummer when you're looking forward to some relaxing time by the pool, and your chair decides to give you trouble. But don't worry, I'm here to walk you through the process of fixing a broken leg on a pool lounge chair.
Step 1: Assess the Damage
The first thing you need to do is take a good look at the broken leg. Figure out how bad the break is. Is it a clean break, or is the wood splintered or the metal bent? Check if there are any loose parts or if the leg is completely detached from the chair. This will help you determine the best way to fix it.
If it's a wooden leg and the break is clean, you might be able to just glue it back together. But if it's splintered, you might need to replace the whole leg. For metal legs, a simple bend might be fixable with some tools, but if it's severely damaged, replacement is probably the way to go.
Step 2: Gather Your Tools
Once you've assessed the damage, it's time to gather the tools you'll need. Here's a general list, but it might vary depending on the type of chair and the break:
- For Wooden Legs:
- Wood glue
- Clamps
- Sandpaper
- A saw (if you need to cut a new piece of wood)
- Screwdriver (if the leg is attached with screws)
- For Metal Legs:
- Welding equipment (if you're up for it and know how to use it)
- Metal epoxy
- Adjustable wrench
- Pliers
Step 3: Fixing a Wooden Leg
If you've got a wooden leg that's broken, here's how you can fix it:
- Clean the Break: Use sandpaper to smooth the edges of the broken pieces. This will help the glue adhere better. Make sure to remove any dirt or debris from the break.
- Apply Glue: Apply a generous amount of wood glue to both sides of the break. Spread it evenly so that it covers the entire surface.
- Align the Pieces: Carefully line up the broken pieces of the leg. Make sure they fit together perfectly. Use clamps to hold the pieces in place while the glue dries. Follow the instructions on the glue for the drying time.
- Sand and Finish: Once the glue is dry, use sandpaper to smooth out any rough edges. You can also paint or stain the leg to match the rest of the chair.
If the leg is too damaged to repair, you'll need to replace it. Measure the length and width of the broken leg, and then cut a new piece of wood to the same size. Attach the new leg to the chair using screws or nails.
Step 4: Fixing a Metal Leg
Fixing a metal leg is a bit more complicated, but it's still doable:
- Straighten the Bend: If the leg is just bent, use an adjustable wrench and pliers to straighten it out. Be careful not to overdo it and cause more damage.
- Weld or Use Epoxy: If the leg is broken, you can either weld it back together or use metal epoxy. Welding is a more permanent solution, but it requires some skill and the right equipment. If you're not comfortable welding, metal epoxy can be a good alternative. Apply the epoxy to the break, following the instructions on the package. Hold the pieces together until the epoxy sets.
- Test the Leg: Once the repair is done, test the leg to make sure it's stable. Sit on the chair and see if it feels secure.
Step 5: Prevent Future Breakages
Now that you've fixed the broken leg, it's a good idea to take some steps to prevent future breakages. Here are some tips:


- Don't Overload the Chair: Make sure you don't put too much weight on the chair. Each chair has a weight limit, so make sure you stay within it.
- Store the Chair Properly: When not in use, store the chair in a dry place. Avoid leaving it outside in the rain or extreme temperatures, as this can weaken the legs.
- Inspect the Chair Regularly: Take a few minutes every now and then to check the legs and other parts of the chair for any signs of damage. Catching problems early can save you a lot of hassle in the long run.
Other Pool Lounge Chair Options
If you're thinking about upgrading your pool lounge chairs or just want to explore some other options, we've got some great choices for you. Check out our Comfortable Accent Chair, which offers a high level of comfort and style. The Leisure Armchair Softable is another excellent option, with its soft and cozy design. And if you're looking for something with a bit more functionality, our Ergonomic Swivel Accent Chair might be just what you need.
Contact Us for Purchasing
If you're interested in purchasing new pool lounge chairs or have any questions about our products, we'd love to hear from you. Whether you're a homeowner looking to spruce up your backyard pool or a business owner in need of chairs for a resort or hotel, we've got the right solutions for you. Reach out to us for more information and let's start a great business relationship.
References
- Home Improvement Magazine - "Fixing Outdoor Furniture"
- DIY Repair Guides - "Pool Lounge Chair Repairs"
- Furniture Manufacturer's Manuals
